TTH350 Architectural Aluminum Door System
TTH350 doors are wind and impact-resistant. They are designed and tested for use in tornado and hurricane-safe rooms that meet FEMA P361-21, ICC500-20, and ICC500-23 standards. It is critical for the TTH350 door system to be used in conjunction with equivalent performance substrate/wall areas.
DIMENSIONS
- Top rail: 7″ X 2 3⁄8″
- Bottom rail: 8 1⁄2″ x 2 3⁄8″
- Glazing stops: 1 3⁄4″ face
- Medium stile: 5″ x 2 3⁄8″
- Mid Rail: 4 1⁄2″ x 2 3⁄8″
- Door Frame: 3 1⁄4″ x 6″
AVAILABLE CONFIGURATIONS
- Single Min Size 3′ x 7′, Max Size 3’6″ x 8′
- Pairs Min Size 6′ x 7′, Max Size 7′ x 8′
REQUIRED HARDWARE
- Sargent FM8713 Non-Electrified Surface Vertical Rod Exit Device
- Sargent 351 Surface Door Closer
- Pemko FMSLF Continuous Gear Hinge
- Pemko 172A Threshold
- Pemko 18061 Door Bottom Sweep
- Rockwood BFLG1050 Latch Guard Cover
- Sargent HC980 Removable Mullion (pairs)
OPTIONAL HARDWARE
- Sargent FM8774 Electrified Surface Vertical Rod Exit Device with…
- 306 Auxiliary Control
- Electrolynx Harness QC-C1500P (Hinge to Power) Electrolynx Harness QC-C012 (Bar to Hinge)
- Securitron DPS-M-GY Door Position Switch
- Norton 6061 Auto Operator
FEATURES
- UL Listed and labeled in accordance with ICC500-20 and ICC500-23
- Glazed with 1.286” TG30 glass
- UL752 Level 3 bullet resistant
- Anodized or painted finishes
- Completely fabricated and shipped fully assembled for easy installation
- Job-specific anchorage requirements provided
- Designed for conventional installation and glazing methods
TESTING / CERTIFICATION
- Tested and certified by UL to meet ICC500-20, ICC500-23, and FEMA P-361-21 requirements for use in tornado and hurricane-safe rooms and shelters including in the 250mph wind zone. UL Certification #ZHLA.71
- Tested by UL for bullet resistance meeting UL752 Level 3. Proof of testing can be found at www.ul.com under online listings.
NOTE: In accordance with ICC500-23 minimum and maximum sizes of each door configuration require testing. Please contact Insulgard to ensure job-specific sizes and configurations fall within testing/certification restraints.
CONSTRUCTION
- Door and frame components constructed from extruded aluminum 6061-T6 alloy temper or equivalent
- Internal fasteners to be stainless steel type 18-8
- Interior/Exterior glazing gaskets to be EPDM sponge and wedge
- All joints and connections will be tight, providing hairline joints and true alignment of adjacent members
- Anchors to be fully concealed
APPLICATIONS
- Schools
- Law Enforcement
- Fire and Rescue facilities
- Emergency Operations Centers
- Community Shelters
- Corporate Headquarters
- Storm Shelters
- Safe Rooms
UL 752 Ballistic Rating
